Cayman S (987) F6-3.4L (2008)
3. Remove external shift mechanism.
3.1.
Unscrew nut -Arrow-.
3.2.
Pull external shift mechanism off the shifting shaft. Use the puller P 9736 to do this.
4. Disconnect clutch line on the clutch slave cylinder.
Seal off the clutch line with a plug.
5. Screw out screw -Arrow- and pull clutch slave cylinder out of the guide.
Installing
1. Install clutch slave cylinder.
Note:
Before installing the clutch slave cylinder, grease the push rod with Kluberalfa in the area of the release-lever ball socket. Part No. 000.043.304.02
(50g tube).
-> Tightening torque: 23 Nm (17 ftlb.)
2. Install external shift mechanism.