Panamera S (970) V8-4.8L (2010)
Removing And Installing Front Side Section Trim
Preliminary work
1. Remove dashboard cover.
Removing front side section trim
INFORMATION: To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the
accessible connection points using a suitable tool.
1. Unclip side section trim from top of A-pillar trim.
2. Unclip side section trim at the lower edge.
3. Remove trim panel in a downward direction.
Installing front side section trim
Installing side section trim
INFORMATION:
-
Check that all the fastening clips are positioned fully and correctly.
-
Check that all the fastening clips are not bent or broken.
-
Replace damaged or missing clips with new ones.
-
Make sure that the retaining lugs are not bent or broken.
-
Replace the trim panel if the retaining lugs are damaged.