porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Body Control Module|Testing and Inspection|Page 4852 > < Trailer Hitch Motor|Service and Repair
Page 1
background image

Body Control Module: Testing and Inspection

Eliminating Symptoms In Body Interior: Reprogramming Control Unit For Front-end Electronics (Vehicle Key Not Recognised In The
Vehicle/SY1309)

Tools

Technical values

General information

Symptom

The vehicle key is not recognised in the vehicle:
-> The error message "Key not recognised in vehicle" is displayed on the instrument cluster and
-> the vehicle will not start.

Causes and remedial action

Cause

If there is strong radio interference (from external transmitters) in certain areas, the transmission power of the vehicle key can be superimposed and its
function can be impaired.

Date of introduction

12 October 2009 as of vehicle identification numbers:

RoW:

97 ZAL 042744 Panamera S
97 ZAL 081432 Panamera Turbo

USA:

A7 2AL 061372 Panamera S
97 3AL 090543 Panamera Turbo

Remedial action

Re-program the control unit for front-end electronics (BCM - Body-Control Module - front) using the PIWIS Tester II with test software version 2.200
(or higher) installed.

Body Control Module|Testing and Inspection|Page 4852 > < Trailer Hitch Motor|Service and Repair