9-2X F4-2.0L Turbo (2005)
2. Install the baffle plate.
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
3. Install the oil strainer onto baffle plate.
NOTE: Replace the O-ring with a new one.
Tightening torque: 10 Nm (1.0 kgf-m, 7.2 ft. lbs.)
4. Apply liquid gasket to the mating surfaces, and then install the oil pan.
Liquid gasket. THREE BOND 1207C (Part No. 004403012) or equivalent
5. Tighten the bolts which install the oil pan onto engine block.
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
6. Lower the engine onto front crossmember.
