9-3 (9440) L4-2.0L Turbo (2007)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
Recall 153 02 - ECM Update For Fuel Supply Issues
MODIFICATION INSTRUCTION
Bulletin Nbr: 248-2690 utg.2
Date:...........December 2007
Market: US/CA
Updating the software in the engine control module T8
Product Emission Campaign 153 02
Cars in stock must be rectified before delivery.
A personal communication must be sent to the owners of cars already delivered requesting them to get in touch with the nearest Saab garage as soon as
possible to have the fault rectified.
Cars affected
Saab 9-3 with engine alternative B207 within the following Vehicle Identification Number ranges:
4D/5D: 71000001 - 71151514
CV: 76000001 - 76111222
NOTE:
Some cars within the Vehicle Identification Number range are not affected. See separate information for the Vehicle Identification Numbers affected.
Background
The calibration of the engine control module may result in the engine receiving too much or too little fuel.
Symptom description
-
Engine is difficult to start
-
Engine does not start
Parts required
Not affected.
Procedure
1. Connect Tech2 version 131.500 or later.
2. Connect to TIS 2000 edition 2007-2 update 1 or later.
3. Update the engine control module, ECM T8, with the following software program: 55566778.
4. Cars with Anti-Pinch: Learn Anti-Pinch, see WIS - 8. Body - Doors and locks - Adjustment/Replacement
5. Set date and time, see WIS - 3. Electrical system - Driver information, main instrument unit and SID - Adjustment/Replacement
Recall identification label