9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-1189001.png)
Muffler: Service and Repair
Front Silencer
Front silencer
To remove
1. Raise the car. CV: Remove Chassis reinforcement, centre tunnel, CV.
2. Cut the front pipe between the flexible section and the silencer to the size given, 87 mm. Use 83 95 667 Pipe cutter/exhaust system.
3. Cut the exhaust pipe at the rear silencer to the size given, 100 mm. Use 83 95 667 Pipe cutter/exhaust system.
4. Remove the front silencer.
To fit
1. Clean the joints and connecting pipe.
2. Fit the joint clamps.
3. Fit the front pipe with new rubber mountings.
4. If necessary also change the rubber mountings for the rear silencer.
