9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
Transmission Cooler: Service and Repair
Flushing Out the Oil Cooler
Flushing out the oil cooler
1. The oil hoses must be detached when changing transmission.
2. Place a receptacle under the car to collect any spilled oil.
3. Remove the plugs and connect a 10 mm plastic hose to one of the oil hose fittings.
4. Connect a funnel to the plastic hose and pour 0.5 litres of automatic transmission fluid into the funnel.
5. Allow the oil to run through, taking with it the contaminated oil.
Note: The oil will run slowly.
6. Plug or connect the pipes when the oil has stopped running.