9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2013002.png)
2. Press in the tripod to the edge of the groove in a hydraulic press with a 30 mm socket.
3. Fit the circlip.
4. Fill the universal joint with 200 9 new grease, 87 92 780 Drive shaft grease, aut, and connect it to the tripod. Close both clamping rings. Use 30 16
235 Pliers.
