9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-1920005.png)
1. Set the solenoid winding in place with the guide pin in the groove on the compressor housing. Check that the windings run correctly. Attach the
circlip.
2. Fit the belt pulley and attach the circlip.
3. Insert the shims in the driver and fit it on the shaft. Tighten the bolt.
Tightening torque: 13 Nm (9 ft. lbs.)
