9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
Ignition Coil Pack: Service and Repair
Ignition Discharge Module, Replacement of Spring
Ignition discharge module, replacement of spring
To remove
1
Unplug the ignition discharge modules 10-pin connector.
2
Remove the 4 screws.
3
Lift up the module.
4
Turn the ignition discharge module upside down and remove the 8 screws.
5
Lift off the black lower section of the ignition discharge module.
6
To change the spring, carefully pry out the old spring with a screwdriver.
To fit
1
Fit a new spring in place of the old one.
2
Fit in reverse order.