9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
Side Air Bag: Service and Repair
WARNING
Read through carefully before starting work.
To remove
1
Ignition switch in the OFF position.
2
Slide the seat forwards as far as it will go.
3
Unscrew the seat at the rear, 2 screws.
4
Slide the seat rearwards and undo the 2 front bolts.
5
Recline the seat, snip the cable ties and unplug the 29-pin connector under the seat. Detach the straps between the cable and the pullmaflex netting.
6
Remove the belt from the seat, if fitted.
7
Lift the seat out of the car.
8
Detach the straps securing the lower edge of the backrest upholstery.
9
Unplug the leads connected to the side airbag, seat-belt warning sensor and seat heating pad. Snip the cable ties round the leads. Detach the lower
edge of the upholstery retaining strip.
10
Pull the leads out through the hole. Withdraw the board.