9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
1
Fit the side airbag, 3 nuts.
Tightening torque: 6.5 N-m (4.8 ft. lbs.)
2
Fit the SAHR's resistance spring, mirror-reversed to the spring on the opposite side
3
Hook the felt padding to the pullmaflex netting.
4
Fasten the two wire rods securing the front upholstery fabric at the lower rear edge.
5
Fasten the rear section of the backrest upholstery fabric by fitting the upholstery retaining strips along the edge on the rear of the backrest frame.
6
Fit the rear section of the backrest upholstery fabric by fastening the upholstery retaining strips along the sides. Fit the lumbar support adjustment
control.
7
Slide the board in to its correct position.
8
Pull the cables through the hole in the backrest upholstery fabric and secure the upholstery retaining strip along the lower edge.