9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
4. Press the dust cap's collar into the brake cylinder's outer groove.
5. Press the piston into the brake cylinder by such an amount that the dust cap fastens in the brake piston's groove.
6. Fit the brake pads.
Important: The outboard brake pads are different for right and left-hand sides. The pads must be fitted with the warning plate downward.
7. Fit the hydraulic body.
Swinging Caliper, Rear Wheel, Changing
Swinging caliper, rear wheel, changing
To remove
1. Raise the car and remove the wheel.
2. Remove the brake pads.
3. Depress the brake pedal slightly, using a brake pedal clamp.
4. Remove fuse No. 1 for the brake lights.