9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2092001.png)
Brake Master Cylinder: Service and Repair
Master Cylinder
Master cylinder, LHD
To remove
1. Cover the left-hand wing.
2. Remove the battery cover and the battery.
3. V6 diesel engine: Remove the turbocharger heat shield.
4. Remove the main fuse box and place it to one side.
5. Drain the brake fluid reservoir. Use 88 19 096 Bleeding equipment.
Then connect the brake bleeder to the bleed nipple on each front brake caliper and draw out the remaining brake fluid.
6. Manual gearbox: Disconnect the clutch fluid hose from the brake fluid reservoir.
7. For change of master cylinder only:
Remove the brake fluid reservoir. Withdraw the reservoir straight upwards.
