saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABS With ESP and TCS|Page 7872 > < ABS With ESP and TCS|Page 7870
Page 10
background image

Battery voltage (+15 circuit)
The +15-circuit power supply goes via fuse 26 (22a) to pin 15 on the control module. When the +15 voltage is applied to pin 15, the control module is
activated.

Diagnostics
DTC C1532 is generated if the power supply drops below 9 V DC for more than 0.5 seconds at a vehicle speed greater than 6 km/h (3.7 mph). The
ESP, TCS and ABS functions will be disabled and the warning lamps for the ABS, foot brake, central warning lamp and ESP OFF switched on. No
DTC is generated at speeds below 6 km/h.

Valve Block, Function

ABS With ESP and TCS|Page 7872 > < ABS With ESP and TCS|Page 7870