9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2655002.png)
12. Remove the adjustment mechanism of the lumbar support.
13. Remove the upholstery retaining strip along the edge at the rear of the backrest frame. Fold the fabric to one side.
14. Detach the two wire rods holding the front upholstery at the bottom rear edge.
15. Remove the felt cover on the side of the airbag at the backrest hinge by detaching the felt cover from the hook in the pullmaflex net.
16. Remove the plastic-coated resistance spring for SAHR.
17. Remove the side airbag, 3 nuts.
18. Lift out the side airbag.
To fit
WARNING: Never repair and re-fit damaged seat covers. The strength of the seams is carefully calculated and must not be altered.
1. Fit the side airbag, 3 nuts.
Tightening torque 6.5 Nm (4.8 lbf ft)
