saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear-Seat Belts, 4D|Page 10368 > < Rear-Seat Belts, 4D
Page 1
background image

Seat Belt: Service and Repair
Rear-Seat Belts, 5D

To remove

1

Remove the parcel shelf, if fitted.

2

Lift out the cover over the storage compartment in the boot and lift out the storage box.

3

Remove the scuff plate, 2 covers, screws and clips.

4

Detach the rear headlining at the edge so that access to the D pillar trim is obtained
Remove the D pillar trim, secured with clips.

5

Remove the parcel shelf support, 1 cover, 3 screws and clips.

6

Tip the rear-seat's seat cushion and backrest forward.
Remove the side bolster by pulling it at the top so that the belt tongue releases. Then unhook the bottom.

Rear-Seat Belts, 4D|Page 10368 > < Rear-Seat Belts, 4D