9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2269002.png)
6. Insert the cable from the left (text side of pliers). The strands must be visible on both sides of the cable terminal contact area.
7. When fitting cable terminal: Compress the cable terminal. Note that the pliers must be pressed together fully before the cable terminal can
be released.
When fitting a sleeve: Compress the cable sleeve. Note that the pliers must be pressed together fully before the sleeve can be released. Put a
shrink tube with adhesive over the sleeve. Fit the cable into the other side of the sleeve in the same manner. Heat the shrink tube over the
sleeve.
8. After crimping, the strands of the cable should be visible on both sides of the terminal's contact area.
List of cable terminals/sleeves and in which boxes they are kept
