saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Axle Shaft|Service and Repair|Page 7134 > < Axle Shaft|Service and Repair|Page 7132
Page 5
background image

10. Secure the brake hose to the mounting on the steering swivel member and fit the clips. Fit the ABS cable. (2 mountings)

11. Fit the headlamp level sensor (option) if applicable. Fit the cover for the belt system.
12. Fit the wheel.

Tightening torque 110 Nm (80 ft. lbs.)

Important:  The wheel must be suspended freely when tightening the wheel bolts

13. Tighten the upper generator bolt and fit the belt tensioner and multigroove belt.

Tightening torque 47 Nm (35 ft. lbs.)

14. Lower the car to the floor.

Axle Shaft|Service and Repair|Page 7134 > < Axle Shaft|Service and Repair|Page 7132