9-7X V8-6.0L (2008)
Important: The new actuator is in Bi-Level mode. Place the door in the middle of the travel position before you install the actuator.
1. Install the mode actuator (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the screws to the mode actuator (1).
Tighten the screws to 1.9 Nm (18 in. lbs.).
3. Install the left hand floor duct. Refer to Floor Air Outlet Duct Replacement - Left Side (with JF4) (See: Air Duct/Service and Repair/Floor Air
Outlet Duct Replacement - Left Side (with JF4))Floor Air Outlet Duct Replacement - Left Side (without JF4) (See: Air Duct/Service and
Repair/Floor Air Outlet Duct Replacement - Left Side (without JF4)).
4. Install the left side sound insulator screws.
5. Recalibrate the mode actuator. Refer to Actuator Recalibration (See: Testing and Inspection/Programming and Relearning/Actuator Recalibration)