9000 L4-1985cc 2.0L DOHC (1986)
Repair Procedure
After checking for position, check the tightness of and, if necessary retighten the following hose clamps for the inlet pipes. If a loose clamp/hose is
found, the hose should be removed and any oil be cleaned from the sealing surface.
-
Clamps securing the hose at the turbocharger.
-
Clamps securing the pipes/hoses running from the turbocharger to the intercooler.
-
Clamps securing the pipes/hoses running from the intercooler to the throttle housing.
Tightening Torque
A.
Turbocharger Hose Clamp 3.5 - 4.5 ft.lb.
B.
Intercooler Pipe Clamps 3.0 - 3.5 ft.lb.
C.
Throttle Housing Hose Clamps 3.0 - 3.5 ft.lb.