9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
+30
Power (+30 circuit) is supplied via fuse 23 to control module pin 22.
The control module uses this current (+30 circuit) for its memory. The engine will not start without power supplied via the +30 circuit.
+15
Power (+15 circuit) is supplied via fuse 9 to control module pin 21.
Applying current (+15 circuit) to pin 21 activates the control module. The engine will not start without current from the +15 circuit.
Current from the main relay (M91-)
With the ignition switch in the ON position, the main relay is activated by the LH control module. The main relay supplies current to the DI/APC
control module on pin 35.
This function makes spark plug burn-off possible in connection with switching off the ignition.
Ground
Ground