9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Exhaust Manifold: Service and Repair
Rear Manifold
REMOVAL
1. Disconnect the negative battery lead and the oxygen sensor cables and raise the car.
2. Detach the joint with the three-way catalytic converter, undo the nuts between the exhaust manifolds and the front exhaust pipe and lower the pipe.
NOTE: There are gaskets between the exhaust manifolds and the front exhaust pipe.
3. Lower the car and undo the upper nuts on the exhaust manifold.
WARNING: The edges of the heat shield may be sharp.
4. Raise the car and remove the lower nuts. Lift down the exhaust manifold complete with gasket.