9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Shift Cable: Service and Repair
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Removal
1. Detach the battery leads and remove the battery.
2. Remove the battery tray.
3. Set the selector lever to neutral.
4. Detach the selector cable from the transmission.
5. Remove lefthand and righthand side trim.
6. Remove the front air duct.
7. Remove the lower storage pocket.
8. Remove selector lever covers and release buttons.
9. Remove the gear indicator cover and unplug the indicator lamp.
10. Detach the gear selector cable from the gear selector bracket.
11. Remove the gear selector cable.