saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Electronic Control Module|Page 6040 > < Electronic Control Module|Page 6038
Page 15
background image

Description Of Function, Remote Control (Part 1 Of 3)

The theft alarm is operated (armed/disarmed) using a remote control.
For remote control of the theft alarm, there is an antenna fitted in the cable assembly next to the alarm control module under the left-hand front seat. This
is connected to the control module (pin 1 for signal and pin 14 for ground). Point the remote control at the antenna. The range is normally about 8
meters
, but can be significantly further in the favorable conditions. Due to legal requirements, the remote control for JA is equipped with a weaker
transmitter for shorter range. The remote control is of the RF (Radio Frequency) type.
The remote control transmits a 64 bit code. This is compared with a list of valid codes (max 4) in the control module. If the code is valid, the control
module acts on the command.

There are two buttons on the remote control for remote control of the alarm:

Electronic Control Module|Page 6040 > < Electronic Control Module|Page 6038