Astra L4-1.8L (2009)
3. Remove the upper center pillar trim.
*
Remove the access panel (1).
*
Loosen the upper center pillar panel in the lower area (2) and remove the upper center pillar panel.
*
Remove the 6 clips.
4. Remove the upper center pillar trim.
Installation Procedure
1. Install the upper center pillar trim.
*
Place the center pillar trim, install upper center pillar in lower center pillar trim.
*
Install the 6 clips.
*
Install the center pillar trim.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Use screw locking compound.
2. Install the seat belt at the front seat.
Tighten the bolt to 20 Nm (15 lb ft).