saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Cargo Net Bracket Replacement|Page 11654 > < Cargo Net Bracket Replacement|Page 11652
Page 24
background image

*

Bolt the luggage shad retainer lock.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the rear inner paneling, rear quarter panel.

*

Connect the luggage compartment light wiring harness plug.

*

Insert the rear compartment side trim.

*

Install the 2 clips.

Tighten 3 bolts in the luggage shade side to 2.5 Nm (22 lb in).

3. Install upper left side quarter trim panel.

*

Install the 3 quarter trim panel clips.

Tighten the quarter trim seat belt bolts to 35 Nm (26 lb ft).

*

Install the cover cap.

4. Install the rear quarter lower trim panel.

*

Install the 8 rear quarter panel clips.

-

Tighten the bolt on the upper quarter trim panel to 2.5 Nm (22 lb in).

-

Tighten the bolt to the rear seat backrest to 40 Nm (30 lb ft).

-

Tighten the lower quarter trim panel bolt to 35 Nm (26 lb ft).

*

Install the rear quarter panel cover cap front.

*

Install the seat belt striker guide bushing to the rear lower quarter panel front.

*

Install the seat belt with striker

*

Install the lower seat belt striker

Tighten the lower seat belt bolt to 35 Nm (26 lb ft).

5. Install the upper center pillar trim.

*

Guide the center pillar trim from above in inner paneling guide front of rear lower quarter panel.

*

Install the upper center pillar trim.

*

Press in the expanding bolt.

Tighten the seat belt bolt to the center pillar trim to 35 Nm (26 lb ft).

*

Install the cover cap.

6. Insert the rear seat backrest.
7. Install the rear seat backrest.

*

Guide in and position the rear seat backrest with guide pins right and left in the rear quarter panel.

Tighten the 4 rear bolts to 20 Nm (15 lb ft).

*

Fold down the rear seat backrest.

*

Insert the 3 belt buckles.

Tighten the 4 front bolts to 35 Nm (26 lb ft).

8. Install the bench seat.

*

Support the 2 seats in the rear bracket.

*

Push the seat simultaneously backwards and down.

*

Bolt the 2 front brackets.

9. Install the rear compartment sill plate.

Install the 7 clips.

10. Install the additional storage trays under the load compartment carpet.

Cargo Net Bracket Replacement|Page 11654 > < Cargo Net Bracket Replacement|Page 11652