Astra L4-1.8L (2009)
-
Tighten the lower rear quarter trim.
*
Install the rear quarter panel cover cap front.
*
Install the seat belt striker guide bushing to the rear quarter panel front.
*
Install the seat belt with striker.
*
Install the lower seat belt striker.
Tighten the lower belt striker to 35 Nm (26 lb ft).
2. Install the upper center pillar garnish molding.
*
Guide the upper center pillar from above in the inner paneling guide front of the rear quarter panel.
*
Install the upper center pillar.
*
Press in the expanding bolt.
Tighten the seat belt bolt to 35 Nm (26 lb ft).
*
Install the cover cap.
3. Insert the rear seat backrest.
4. Install the rear seat backrest.
*
Guide in and position the rear seat backrest with the guide pins right and left in the rear quarter panel.
Tighten the 4 rear bolts to 20 Nm (15 lb ft).
*
Fold down rear the seat backrest.
*
Insert the 3 seat belt buckles.
Tighten the 3 front bolts to 20 Nm (15 lb ft).
5. Install the bench seat.
*
Support the 2 seats in the rear bracket.
*
Push the seat simultaneously backwards and down.
*
Bolt the 2 front brackets.
6. Install the additional storage trays under the load compartment carpet.
7. Install the trailer hitch ball head.
*
Thread the belt through the eye.
*
Insert the ball.
*
Tighten the belt.
8. Install the rear compartment carpet.
9. Install the luggage shade.
*
Engage the cover in the side support 2,.
*
Install the 2 retaining cords to the liftgate.
10. Install the sill door panel.
Install the 5 clips.
Quarter Lower Rear Trim Panel Replacement (Sedan)
Quarter Lower Rear Trim Panel Replacement (Sedan)
Removal Procedure
