Astra L4-1.8L (2009)
*
Tighten the voltage supply nut to 7 Nm (62 lb in).
3. Install the cover for the engine compartment electrical center and the positive distribution.
4. Install the compact plug.
5. Install the wiring harness for positive distribution to the positive terminal.
Tighten the bolt to 10 Nm (89 lb in).
6. Connect the battery.
Connect the negative battery cable.
Note: When replacing the control unit, after fitting the control unit, carry out a Program with TECH 2. Refer to Control Module References (
See: Testing and Inspection/Programming and Relearning).
7. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
