Astra L4-1.8L (2009)
Note: Ensure the wiring is routed properly.
2. Position the wiring harness and attach to the front frame.
3. Tighten the retaining nut.
Tighten the nut to 30 Nm (22 lb ft).
4. Install the right engine splash shield.
Note: Ensure the wiring is routed properly.
2. Position the wiring harness and attach to the front frame.
3. Tighten the retaining nut.
Tighten the nut to 30 Nm (22 lb ft).
4. Install the right engine splash shield.