Astra L4-1.8L (2009)
Note:
*
The CIM replaces the existing contact unit and contains additional functions.
*
The contact unit may not be twisted when it has been removed.
*
When removing and installing, ensure that the markings (arrows) are opposite each other as shown in the illustration.
6. Remove the CIM.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the CIM.
*
Connect and lock the wiring harness plug.
*
Install the wiring harness holder.
Tighten the 3 bolts to 3.5 Nm (32 lb in).
