saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

A/T - Oil Cooler Line Torque Procedure|Page 6213 > < A/T - Oil Cooler Line Torque Procedure|Page 6211
Page 3
background image

7.

Inspect the transmission fluid level. Refer to Transmission Fluid Check in SI.

In case the connection between the oil line and the oil cooler flange is leaking, do NOT increase the torque value! Loosen the oil cooler "banjo"
bolt(s) and retighten again to 25 Nm (18 lb ft). Take care that the oil line is correctly positioned after retightening. If the oil line is not correctly
repositioned, repeat Step 5.

Parts Information

Disclaimer

A/T - Oil Cooler Line Torque Procedure|Page 6213 > < A/T - Oil Cooler Line Torque Procedure|Page 6211