Coupe L4-1.9L DOHC VIN 7 (1994)
2. If replacing lower:
a. Install outer door panel lower sealing strip with rivets.
b. Install J-clips.
3. If foam seal strip is removed, replace by applying a strip of Kent Industries P/N 40105 1/4 in. x 5/32 in. or equivalent along the outboard edge of
the upper to lower attaching flange of the upper outer door panel (be careful not to cover holes).
4. Align lower panel tabs with corresp6nding upper panel slots. With tabs engaged in slots, rotate upper downward into position.
5. Install upper to lower screws, align fore/aft relationship of upper to lower and tighten.
Torque: 6 Nm (53 in.lbs.)
6. Install outer door panel.