ION L4-2.2L VIN F (2004)
Console: Description and Operation
KEY AND LOCK CYLINDER CODING
KEY IDENTIFICATION AND USAGE
The keys that are furnished with the vehicle are master keys and will operate all the locks on the vehicle. The keys are double sided and reversible.
The keys have 10 cut positions (1) with five different depths (2).
CUTTING KEYS
The key code can be obtained from the four-digit number on the key tag that accompanies the original master keys. The four-digit key code cross-
references to the cut and tumbler sequence. The keys have 10 key cut positions (1) and five key cut depths (2). Key cut positions are numbered 1-10,
counting from the head of the key to the tip. The key cut depths are 1-5, cut depth number 5 is the deepest cut.
1. Cut a blank key to the proper depth and sequence of each of the tumbler positions.
2. Inspect the mechanical operation of the key in the lock cylinders in the doors, the ignition switch and the rear compartment.With each side of the
key pointing up inside the lock, inspect the operation of the lock in both directions.
