saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Garnish Molding Replacement|Page 11824 > < Garnish Molding Replacement|Page 11822
Page 16
background image

Replacement/Carpet Retainer Replacement - Rear (Sedan))Carpet Retainer Replacement - Rear (Coupe)  (See: Carpet/Service and
Repair/Removal and Replacement/Carpet Retainer Replacement - Rear (Coupe)) .

4. Lower the rear folding seat back:

1. Open the trunk.
2. Pull the latch release handle.

5. Remove the push-in retainer.
6. Disengage the clips by pulling at the clip locations.
7. Slide the lock pillar trim out from underneath the seat belt webbing.
8. Remove the lower garnish molding at the lock pillar from the vehicle.
9. Remove the rerouter from the child shoulder belt guide. Refer to Guide Replacement - Rear Seat Shoulder Belt   in Seat Belts.

Installation Procedure

Garnish Molding Replacement|Page 11824 > < Garnish Molding Replacement|Page 11822