ION L4-2.2L VIN F (2004)
Installation Procedure
Notice: Internal components of this booster are not serviceable. The housing must not be unstaked and separated. Separating the housing will cause
permanent deformation, preventing the booster from holding proper volume.
1. Install the mounting gasket to the vacuum brake booster.
2. Turn the booster (1) to face the LH strut tower.
3. Ensure that the rear of the booster (1) shell is clear of the valve body cover on top of the transmission.
4. Rotate the booster (1), while it remains sideways to the dash panel, and carefully install the booster (1) down and rearward in between the cowl
and the transmission.
5. With the booster (1) directed toward the coolant surge tank, install the booster (1) pushrod into the opening in the dash panel.
6. Align the brake booster to the dash panel, and insert the booster studs through the dash.
7. Loosely install the brake booster mounting nuts.
