ION L4-2.2L VIN F (2004)
8. Apply a thin coating of lithium grease to the pushrod pin on the brake pedal.
9. Connect the brake booster pushrod (3) to the brake pedal.
10. Install the washer (2) and retaining clip (1) to the brake pedal.
Notice: Refer to Fastener Notice in Service Precautions.
11. Tighten the vacuum brake booster mounting nuts.
-
Tighten the nuts to 25 Nm (18 ft. lbs.).
12. Install the accelerator pedal into position and install the pedal mounting nuts.
13. Using the engine support fixture, slowly raise the transmission into the fully installed position.
14. Carefully install the transmission side mount-to-transmission bolts by hand. Do NOT force the bolts.
15. Using ONLY HAND TOOLS, Tighten the transmission side mount-to-transmission bolts.
16. With the vehicle still positioned on the hoist, raise and support the vehicle.
