ION L4-2.2L VIN F (2004)
1. Install the refrigerant filter into the condenser tube.
2. Install new sealing washers on the condenser tube and evaporator hose fittings.
3. Install the condenser tube and evaporator hose to the TXV.
4. Install the TXV nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 20 N.m (15 lb ft).
5. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
6. Leak test the fittings using the J 39400-A.
