ION L4-2.2L VIN F (2004)
3. Place a drain pan under the water pump drain port.
4. Loosen the water pump drain bolt (1) and drain the coolant from the water pump.
5. Close and tighten the water pump drain bolt (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 10 N.m (88 lb in).
6. Lower the vehicle.
7. Reposition the heater inlet hose clamp at the heater core using SA9111E.
8. Remove the heater inlet hose from the heater core.
