saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Wiring Harness, A/T > < Control Valve Body Cover Replacement|Page 5325
Page 7
background image

14. Install RTV sealer Saturn P/N 89020326 onto the control valve body cover and install the control valve body cover.
15. Apply threadlocker Saturn P/N 21485277 to the bolts. Hand tighten the bolts.

16. Tighten the valve body cover bolts using the sequence shown.

^

Tighten the bolts to 13 Nm (1115 inch lbs.).

17. Install the transaxle cooler lines to the transaxle. 
18. Lower the vehicle.

Important:  Do not use AF P/N 21005966 or P/N 21019223, these fluids are not compatible with this transaxle. Use Saturn T-IV P/N 22689186.

19. Add fluid to the transaxle as necessary. 
20. Start the engine and check for leaks.

Wiring Harness, A/T > < Control Valve Body Cover Replacement|Page 5325