saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5299 > < A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5297
Page 4
background image

11.

Lower vehicle.

Important:

Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

12.

Connect negative battery cable.

12.1. Install the battery ground (negative) cable and bolt to the battery.

Tighten

Tighten battery terminal bolt to 17 Nm (13 ft-lbs).

12.2. Program all of the customer's radio station presets and set the radio clock to the current time.

13.

Drive vehicle to verify condition has been repaired.

A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5299 > < A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5297