ION L4-2.2L VIN F (2004)
10. Position the CV joint cage (4) and the CV joint inner race 90 degrees to the centerline of the CV joint outer race (1).
Align the CV joint cage windows (3) with the lands of the CV joint outer race (2).
11. Remove the CV joint cage (4) and the CV joint inner race from the CV joint outer race (1).
12. Rotate the CV joint inner race 90 degrees to the centerline of the CV joint cage with the lands of the CV joint inner race (1) aligned with the
windows of the CV joint cage (2).
13. Pivot the inner race into the cage window and remove the inner race.
14. Clean the inner and outer race assemblies, the CV joint cage and the balls thoroughly with cleaning solvent. Remove all traces of old grease and
any contaminates.
15. Dry all of the parts.
Assembly Procedure
1. install the new boot retaining clamp (2) on the neck of the boot. Do not crimp.
2. Slide the boot (1) onto the axle shaft and position the neck of the boot in the boot groove (3) on the bar.
