L100 L4-2.2L VIN F (2001)
7. Remove the linkage installer and install a new nut.
Torque: Tie Rod End-to-Knuckle Nut: 60 Nm (45 ft. lbs.)
8. Inspect boot for damage and replace part if damaged.
9. If equipped with ABS, install sensor mounting bracket and sensor.
Torque: ABS Sensor Bracket-to-Knuckle: 8 Nm (71 inch lbs.)
10. Install dust shield and tighten screws.
Torque: ABS Sensor-to-Bracket: 4 Nm (35 inch lbs.)
11. Install rotor and tighten rotor screw.
Torque: Front Rotor-to-Hub: 3.5 Nm (27 inch lbs.)
IMPORTANT: Apply Loctite 242(R) Threadlocker (or equivalent) on threads of caliper bracket bolts.
