L200 L4-2.2L VIN F (2002)
6. Remove both stabilizer bar links from rear axle control arms.
CAUTION: FAILURE TO SUPPORT THE REAR SUSPENSION SUPPORT ASSEMBLY CAN CAUSE SUSPENSION SUPPORT TO DROP
TO THE GROUND WHEN MOUNTING BOLTS ARE REMOVED.
CAUTION: SUPPORT THE FRONT OF THE VEHICLE TO ENSURE THAT THE VEHICLE WILL NOT BECOME UNBALANCED AND TIP
FORWARD, OFF THE HOIST, ONCE THE REAR SUSPENSION SUPPORT IS REMOVED (DUE TO DECREASED PROPORTION OF REAR
VEHICLE MASS). FAILURE TO SUPPORT FRONT OF VEHICLE COULD CAUSE VEHICLE TO FALL OFF THE HOIST.
7. Support rear suspension support with a suitable support stand.
8. Remove the four rear suspension support to body bolts and discard bolts.
9. Remove rear suspension support from vehicle.
DISASSEMBLY
1. Using Bushing Remover/Installer KM-906B (KM-906-70, KM-906-11, and KM-906-12A) press out the rear suspension support bushings.
