L200 L4-2.2L VIN F (2002)
ASSEMBLY
1. Using bushing remover/installer KM-906-70, KM-906-13A, and KM-906-14 press in new damping bushings.
INSTALLATION
1. Raise rear suspension support assembly into vehicle and install using new bolts.
^
Rear Suspension Support-to-Body Bolts: 90 Nm (66 ft. lbs.) + 90° to 105°
2. Install upper and lower rear suspension control arms to rear axle control arms using new nuts and bolts.
^
Rear Suspension Control Arm-to-Knuckle: 90 Nm (66 ft. lbs.) + 60° to 75°
