L200 L4-2.2L VIN F (2002)
4. Install the NEW cage nuts into the body for the suspension supports, as torque retention of old nuts may not be sufficient.
5. Install the suspension supports using NEW bolts and tighten all the frame bolts using SA9140E or equivalent.
Tighten the suspension support-to-body bolts to 90 Nm (66 lb ft) + 45-60 degrees.
Important: Use a new bolt and nut. The torque retention of old fasteners may not be sufficient.
6. Install the lower control arm ball stud into the steering knuckle. Hold the bolt stationary while turning the nut.
Tighten the lower control arm-to-steering knuckle to 100 Nm (75 lb ft).
