L200 L4-2.2L VIN F (2002)
Notice: Hold the ball stud from turning when removing/installing the nut. The boot can become torn and damaged if the ball stud turns.
10. Using new nuts, install the stabilizer bar link-to-strut assembly.
Tighten the stabilizer bar link-to-strut to 65 Nm (48 lb ft).
11. Inspect the rubber boots for damage and replace the boots if damaged.
12. Install the rear transaxle mount.
13. Install the 2 rear transaxle mount to frame bolts.
Tighten the rear transaxle mount-to-frame bolts to 60 Nm (44 lb ft).
