L200 L4-2.2L VIN F (2002)
3. Using Torque Angle Gauge SA9140E (or equivalent), install control arms to frame assembly using new bolts.
^
Control Arm-to-Frame: 90 Nm (66 ft. lbs.) + 75° to 90°
INSTALLATION
IMPORTANT: Be sure the frame alignment tool fully engages in all gauge holes.
1. Install new cage nuts into the body as torque retention of old nuts may not be sufficient.
2. Raise frame assembly to body.
IMPORTANT: Do not tighten fastener at this time.
3. Install new frame-to-body bolts.
