L200 L4-2.2L VIN F (2002)
18. Install exhaust manifold pipe on vehicles equipped with L81 engines, and L61 engines with manual transaxles.
19. Tighten exhaust manifold pipe to exhaust manifold nuts.
^
Exhaust Manifold Pipe-to-Exhaust Manifold Nuts: 30 Nm (22 ft. lbs.)
20. Tighten exhaust manifold pipe to exhaust pipe bolts.
^
Exhaust Manifold Pipe-to-Exhaust Pipe Bolts: 20 Nm (15 ft. lbs.)
21. Install 02 sensor clamp to underbody attachment nut on vehicles equipped with L61.
^
02 Sensor Clip-to-Underbody Attachment Nut: 4 Nm (35 inch lbs.)
22. Connect 02 sensor electrical connector.
NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors. Failure to do so can cause wheel bolts
to loosen in service.
23. Install wheel and tire assemblies onto hub.
24. Install wheel bolts and tighten in a crisscross pattern.
24.1.
Hand tighten all five wheel bolts.
24.2.
Use a torque wrench to tighten wheel bolts using a crisscross pattern.
^
Wheel Bolts (Initial Torque): 63 Nm (46 ft. lbs.)
24.3.
Use a torque wrench to final tighten wheel bolts using a crisscross pattern.
^
Wheel Bolts (Final Torque): 125 Nm (92 ft. lbs.)
