L300 V6-3.0L VIN R (2001)
2. Lubricate pin sleeve with silicone grease, and install into caliper.
3. Lubricate straight section (not threads) of guide pins with silicone grease.
NOTICE: Linings are identified for left or right use. Install linings so arrow is pointing downward, with forward rotation of wheel.
IMPORTANT: Remove all rust and corrosion from caliper brackets when installing brake pads. If installing used brake pads, remove all rust and
corrosion from ends of brake pads and from the notch. Make sure brake pads move freely in caliper bracket when brakes are assembled.
4. Install inner and outer brake pads into caliper.
5. Install caliper body onto caliper support.
6. Install guide pins and tighten.
Torque: Caliper-to-Bracket Guide Pins: 30 Nm (22 ft. lbs.)
7. Install guide pin bushing caps.
8. Install caliper retaining spring.
NOTICE: Be sure that front brake hose is routed properly. Be careful not to install front brake hose with a twist. Incorrect front brake hose
installation could result in brake failure.
